Atlas Transformer Inc.
Company Description
We engage in the custom design and manufacturing of high quality medium and high voltage dry type and liquid filled transformers. Serving industrial, commercial and institutional clients, our transformers are located throughout Canada, with additional units in the USA, Middle East, Asia, Mexico, and South America.
DRY TYPE TRANSFORMERS
Atlas Transformer specializes in and provides a full range of Dry Type Transformers that will satisfy and meet your quality requirements.
Prior to shipment, all Atlas transformers are tested in accordance with applicable standards that match customer specifications. All tests are performed in our testing facility by skilled quality control technicians to ensure a high quality and reliable transformer.
PRODUCTS
DRY TYPE POWER TRANSFORMER
Up to 20 MVA
To 46 kV Class, 200 kV BIL
Unit Substation or Standalone
DRY TYPE SERVICE STATION
Up to 750 kVA
To 34.5 kV Class, 150 kV BIL
STANDARDS
Built and tested in accordance with CSA C9 M1981 Standards, and are Certied by CSA C22.2 NO. 47-M90, up to 12 MVA, 34.5 kV CLASS
ISO 9001-2008 Registered
STANDARD PRODUCTION TESTS
Winding Resistance Measurements
Ratio and Polarity Measurements
Exciting Current and No Load Losses Measurement
Impedance and Load Losses Measurements
AC Dielectric Test
Induced Voltage Test
Core Ground Test
OPTIONAL TRANSFORMER TESTS
Temperature Rise
Sound Level
Radio Influence Voltage
Partial Discharges (Corona)
Basic Insulation Impulse Level
LOW VOLTAGE, HIGH EFFICIENCY VENTILATED TRANSFORMERS
SPECIFICATIONS
Meets C802.2.14 Standard for energy efficiency
15 – 1,000 kVA range
NEMA 3R enclosure for indoor or outdoor use
60 Hz
Aluminum winding
150ºC temperature rise
220ºC insulation class
Heat-cured ASA-61 gray powder coating finish
Cores of high quality electrical steel
UL rated / CSA approved
FEATURES, FUNCTIONS & BENEFITS
Space saving design for easy handling and installation
Termination lugs provided with transformer through
75 kVA three-phase
Vibration isolation pads provide quiet operation
Staggered front loop taps for easy connection
On site inventory for fast delivery
STANDARDS
Meets NRCAN 2019 requirements for energy efficiency
January 1, 2018 Ontario requirements
Canada-wide May 1, 2019 requirements
Built in accordance with NEMA, ANSI, UL and CSA
standards
OPTIONS AND ACCESSORIES
115ºC, 80ºC temperature rise
50 Hz
Copper windings
Special impedance
Reduced noise level
Enclosures NEMA 4, 4X, 12, 12X
Electrostatic shields
K factors: K4, K9, K13, K20
Special Voltages
Models with CE Marking are available on request
